Barrett 950 HF - RF Output Power

RF output power
The key toggles the RF output power setting. The high power setting is 125 watt
PEP (voice) and the low power setting is 25 watt PEP (voice). Note:- the transceiver low
power setting is sometimes set to a different value dependant on customer requirements.
The lower power symbol, , will appear on the display.
Note:- If a channel was programmed for low power during channel programming
the selection of high power using the method above is disabled
To select high power if low power was previously selected - example
To select low power if high power was previously selected - example
BARRETT 950 HF TRANSCEIVER
PAGE 34