ALE default
Sounding On/Off
This option is to reselect factory defaults within the ALE processor. The following screen is
0displayed:-
This option switches sounding on and off. When sounding is switched off, your transceiver
no longer send or receives ALE sounding signals, and cannot update its in formation on
network link analysis. For correct ALE operation, sounding should be left on all the time.
Note :- If ALE silent mode is selected on, the sounding On/Off option setting is ignored and
your station does not send or receive ALE sounding signals.
... selects sounding on
... selects sounding off
The ALE select “Sounds Off” Or “Sounds On” on a channel basis determined by the way the
channel was programmed by the Barrett ALE PC based fill program.
BARRETT 950 HF TRANSCEIVER
PAGE 87
To Next Page
Loading...
