ALE silent mode
This option selects the silent mode of operation required.
ALE operates normally both transmitting and receiving sounds (if enabled).
ALE transmit mode is disabled (silent mode), the ALE controller does not respond to
incoming ALE calls and does not send or receive sounding signals even if sounding is
switched on.
Note:- You can still make ALE calls in this mode.
The ALE will operate as described in the mode above but only on channels programmed for
Tx disable mode(silent mode) by the Barrett ALE PC based fill program.
BARRETT 950 HF TRANSCEIVER
PAGE 93
To Next Page
Loading...
