Barrett 950 HF - Scan Resume Time; Microphone Up;Down Buttons

Scan resume time
Microphone Up/Down buttons
Enabling this feature, by specifying a scan resume time, the Barrett 950 transceiver will
resume scanning the scan table previously selected at a time after the last key press
specified by the scan resume time selected. The example below will cause the 950
transceiver to resume scanning 1 minute after the last key press :-
The channel up/down buttons on the microphone can be enabled or disabled using this
function.
... microphone up/down buttons enabled
... microphone up/down buttons disabled
BARRETT 950 HF TRANSCEIVER
PAGE 61