Advanced selective call functions
- select the channel on which to send the call.
- listen for traffic on that channel, if no traffic is heard then continue.
- press the key.
- enter the desired destination ID using the numeric keys
- press the key.
- wait for the selective call to be sent.
- wait for the remote transceiver unit to send back its position data or error
message. If the unit times out before the position is received an error message
will also be displayed.
Requesting another transceivers GPS position
Making a GPS request call to station with ID 4321 - example
BARRETT 950 HF TRANSCEIVER
PAGE 35
To Next Page
Loading...
