Barrett 950 HF - Page 64

select the cloning menu:-
Now the two selcall self ID’s of the slave transceiver must be entered:-
Enter selcall self ID1, using the numeric keys, for use on channels programmed for Barrett
standard and CCIR 493 (WA2 in Australia ) format selcall.
Enter selcall self ID2, using the numeric keys, for use on channels programmed for
Australian RDD format selcall.
Note:- the self ID must not be set to X000, XX00 or XXX0 as these are reserved selcall
numbers for all call, group-call or sub-group-call.
On the slave transceiver (transceiver to receive information)
BARRETT 950 HF TRANSCEIVER
PAGE 64