Bartec BCS 3608ex-NI - Product Description

Handscanners
BCS 3600
ex
series
4 Product description
Subject to technical modifications
17/05/18
17 / 72
4 Product description
The BCS 3608
ex
-NI and BCS 3608
ex
-IS series consists of wired hand-held scanners for capturing
1D/2D barcodes and for OCR text recognition (see Tab. 23, P. 36). The BCS 3678
ex
-NI and BCS
3678
ex
-IS hand-held scanners with Bluetooth supplement the series with wireless data capture.
The hand-held scanners in the BCS 3608
ex
-NI- and BCS 3608
ex
-IS series have been modified for use
in potentially explosive atmospheres (see Chapter 2.1, P. 12).
The barcodes are captured by a 1D/2D scan engine. The ergonomic design permits 1-handed
operation.
4.1 Configurations and comparison with ZEBRA hand-held scanners
Configurations
Configuration Data transfer Data capture
BCS 3608
ex
-NI
BCS 3608
ex
-IS
Connection cable
(see Chapter 4.3, P. 22)
1D-/2D-Imager (SE4750)
BCS 3678
ex
-NI
BCS 3678
ex
-IS
Bluetooth 4.0
2.4 GHz to 2.4835 GHz
(see Chapter 4.4, P. 25)
Cradle for non-hazardous area;
only for BSC 3678
ex
-NI /
BSC 3678
ex
-IS
Bluetooth 4.0
2.4 GHz to 2.4835 GHz,
(see Chapter 4.4.4, P. 27)
None
4 different universal supply modules for installation in a potentially explosive atmosphere (Zone 1
/Zone 2; Division 1 / Division 2, each Bluetooth or wired (see system overview, Chapter 15.2,
P. 70))
Tab. 8: Configurations
Comparison
Tab. 9 compares the hand-held scanners that have been modified for potentially explosive
atmospheres to the original hand-held scanners from ZEBRA.
BARTEC ZEBRA
BCS 3608
ex
-NI
BCS 3608
ex
-IS
DS3608-HP
BCS 3678
ex
-NI
BCS 3678
ex
-IS
DS3678-HP
Tab. 9: Comparison with ZEBRA hand-held scanners