Bartec BCS 3608ex-NI User Manual

8 Operation
Handscanners
BCS 3600
ex
series
54 / 72
Subject to technical modifications
17/05/18
8.1.2 Placing the hand-held scanner in the cradle
DANGER
Non-approved cradle!
Loss of function and risk of explosion.

Only use the cradle that has been specified for the relevant configuration by BARTEC.
The approved accessory is shown in the system overview (see system overview, Chapter 15.2,
P. 70). The model is clearly indicated on the type label.
DANGER
Spark formation!
Explosion.

Only use the cradle outside the potentially explosive atmosphere.
1. Place the head of the hand-held scanner in the cradle.
2. Press the underneath of the hand-held scanner into the cradle until you hear the hand-held
scanner click into place.

Bartec BCS 3608ex-NI Specifications

General

Brand	Bartec
Model	BCS 3608ex-NI
Category	Scanner
Language	English