Automatic
Speed Change
Adjusts the sewing speed according to stitch length for the
best sewing quality.
Origin Automatically seeks the design origin position, to allow
proper repositioning of the pantograph if it is accidentally
moved while the power is off.
Standby Recovers the pantograph position if power fails while the
machine is sewing.
Automend Backs up a single head, to repair missed stitches. After
sewing is resumed and the missing stitches are filled in, the
remaining heads resume sewing.
Stitchback Reverses the pantograph to repair missed stitches, letting
you back up to the required point. All heads sew from the
backup point.
Direct Needle Select a specific needle on the display and move directly to
it in one movement.
Manual Trim
at Sewing Head
Execute a manual trim from any sewing head without
walking to the automat.
Sub Soft Limits Three different frame or hoop sizes can be stored within Soft
Limits.
Password Design
Security
Password protection for designs in memory. The Memory
Out function is disabled unless password is entered.
1-10 Overview BENS Operation Guide - 12/99
To Next Page
Loading...