Barudan BENS - Specifications

JM-IV keyboard have tape output connections that are
compatible with the BENS. The chart on the following page
identifies the devices that communicate through the tape
port and the cables used to connect them.
BENS COM Port The BENS can load patterns from, and save to, devices
connected with the optional communication (COM) cable.
The COM cable connection port is on the back of the
automat.The chart on the following page identifies the
devices that communicate through the COM port and the
cables used to connect them.
Specifications
•
RS-232C cable
•
9 pins DUB Connector (AT compatible)
•
Baud rate 9600 bps
•
Stop bits: 2
•
Data bits: 8
•
Parity: None
•
Handshake XON/XOFF flow control: None
1-24 Overview BENS Operation Guide - 12/99