BENS Features
Icon Menus The LCD display uses easily recognizable icons for machine
commands.
Pattern Memory The BENS internal memory holds 261,000 stitches,
expandable to 696,000 stitches. There are 10 locations in
which to store patterns.
Memory Backup A lithium battery saves machine pattern memory in case of
power failure, or when the power is turned off. A backup
disk of all patterns stored in memory can easily be created
with one command.
Pattern
Programming
Change the pattern size, orientation or repeat.
Add/Merge
Patterns
Create a new pattern by combining patterns, or
repeating a single pattern with control over the space
between the repetitions.
Saving Patterns Save an edited pattern on floppy disk or paper tape.
Soft Limits Set soft field limits from within the machine software that
protect the machine by preventing the hoop or pantograph
from running into the needle.
Software Updates Machine software is now easily updated from floppy disk,
eliminating the need to change ROMs.
Teach Easily locates and changes existing function codes in the
pattern. Lets you insert new codes in the pattern.
Float Moves the pantograph through the pattern without sewing.
Perimeter Trace Quickly verifies the pattern size before sewing, preventing
the needle from running into the hoop and damaging the
machine.
Automatic
Thread Trimmer
Trims the top and bottom threads. Programmable to trim on
long jump stitches, color changes, or trimming signals
contained in the pattern.
BENS Operation Guide - 12/99 Overview 1-9
To Next Page
Loading...