Powering on the Machines
There are two power switches on the BENS. One is located on the driver box.
The second is a softkey located on the automat.
Powering On
1.
Lift the ON/OFF switch on the driver box to the on position. The green
lamp on top of the switch comes on.
NOTE: A machine malfunction may trip the breaker on the driver box.
The switch will be between the on and off positions when the breaker is
tripped. If this happens, first check for any possible cause. If nothing is
BENS Operation Guide - 12/99 Overview 1-17
To Next Page
Loading...