User Manual
1
Bascom products are designed and tested to meet strict safety requirements. Carefully read the
instructions below before you start working with the products and, if necessary, consult the
instructions again, so you are always using the product safely.
Carefully follow the operating instructions when connecting this product.
Keep all parts of the product out of the reach of children.
Do not drop the product and do not shake the product. A rough treatment could damage the
internal electronic switch and the fine mechanics.
Always use the included power supply units to provide the product with power.
Prevent overload of wall sockets and extension cords.
Clean only the exterior of the product, with a soft, dry cloth.
Before cleaning the product, remove the product from the power source.
Do not use aggressive chemicals, solvents or strong detergents to clean the product.
Contact your supplier if you have any doubts about connecting the product, the product safety
or the operating mode of the product.
Online Help Center
Questions about your camera system? Please visit our online help center. Here you can find the most
recent articles about how to operate your system.
Visit: www.bascom.support
Safety Instruction
Bascom hereby declares that the product is in conformity with the essential requirements and other
relevant provisions of guidelines 2004/108/EC, 2006/95/EC and 2011/65/EU. A copy of the
declaration of conformity can be found on our website: www.bascom-cameras.com/conformity/.
Declaration of Conformity
To Next Page
Loading...