Bascom RECORDER - Load Default Settings for Camera; Upgrade Camera

User Manual
47
3.6.5.1 Upgrade Camera
1. Choose one of the cameras you want to upgrade firmware.
2. Click Select File to select the update file from your USB flash drive, then click OK.
3. Click IPC Upgrade button to start upgrading. You will be required to input the Admin password to
authenticate. Please do NOT power off system and camera or remove the USB flash drive during
the upgrading.
1. Choose the cameras you want to restore.
2. Click Load Default to restore settings. You will be required to input the Admin password to
authenticate.
3.6.5.2 Load Default Settings for Camera