9424200996 v
BE1-11m Revision History
Change
• Added Isolation under General Specifications in Section 1
• Added GOST-R Certification in Section 1
• Replaced Figure 3-5, BE1-11 Connection Screen (Added Advanced button)
• Added explanation of IRIG Decoding setting and replaced Figure 4-9, Clock
Setup Screen
• Added information on Output Override Alarms in Section 8
• Changed listing of Metered Frequency Range from 10-75 Hz to 10-125 Hz in
Sections 1 and 11
• Replaced Figure 11-11, Motor Meter Screen (Added Thermal Capacity Reset
button)
• Improved Settings Calculation Example in Section 12
• Added equations for Standard Curve and IEC Curve under 49TC Time
Curves in Appendix A
• Added UL Approval for hazardous locations in Appendix E
• Minor text edits and other improvements throughout manual
• Added DNP Certification in Section 1
• Added Figure D-2, Re-Attaching the Front Cover
• Added RTD Module Communications Setup Procedure in Appendix E
To Next Page
Loading...
Need help?
General
