Baumuller b Maxx Series User Manual

Application Manual POWERLINK Controlled Node
Document no. 5.13013.04
75
of 80
Table of figures
Table of figures
Calculation on the basis of the Factor Group............................................................................. 21
State diagram POWERLINK Controlled Node......................................................................... 31
Configuration - Import fieldbus device........................................................................................ 41
Configuration - Physical View - open POWERLINK................................................................... 42
Configuration - Select controller module.................................................................................... 43
Configuration - option module in Physical View......................................................................... 43

Baumuller b Maxx Series Specifications

General

Control Voltage	24 V DC
Protection Class	IP20
Series	b Maxx
Category	Controller
Communication Interfaces	Ethernet, CANopen, PROFIBUS
Feedback Systems	Resolver, Incremental encoder, Absolute encoder
Operating Temperature	0°C to +45°C
Relative Humidity	5% to 95% (non-condensing)