EC - Declaration of Conformity Doc.-No. 5.10060.03
Date: 17.05.2017
according to Machinery Directive 2006/42/EC
The Manufacturer: Baumüller Nürnberg GmbH
Ostendstraße 80-90
90482 Nürnberg, GERMANY
declares, that the product:
Designation: b maXX 5000 option module with safety function STO
Type: BM5-O-SAF-001-000-xxx
manufactured since: 04.11.2010
is developed, designed and manufactured in accordance with the Machinery Directive 2006/42/EC.
This product complies with the requirements of the EMC Directive 2014/30/EU.
Applied harmonized standards:
Authorized person to compile the technical files:
Name: Engelbert Meier, Baumüller Nürnberg GmbH
Address: Ostendstraße 80-90, 90482 Nürnberg, Germany
Notified body executed the EC type-examination procedures according to Machinery Directive 2006/42/EC:
Name: TÜV Rheinland Industrie Service GmbH
Address: Am Grauen Stein, 51105 Köln / Germany
Identification number: 0035
Registration number: 01/205/5031.01/16
Attention should be paid to the safety instructions in the manual.
This product is to be used in machinery and must not put into operation until the machinery, into with it is
incorporated, has been declared to be in conformity with the Machinery Directive 2006/42/EC.
Nuremberg / 17.05.2017
Location / Date
Subject to change of this declaration of EC conformity without notice. Actual valid edition on request.
Standard Title
EN 62061:2005 + AC:2010 +
A1:2013 + A2:2015
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable
electronic control systems
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems
Part 1: General principles for design
EN 61800-5-1:2007 Adjustable speed electrical power drive systems -
Part 5-1: Safety requirements - Electrical, thermal and energy
EN 61800-5-2:2007 Adjustable speed electrical power drive systems -
Part 5-2: Safety requirements - Functional
EN 60204-1:2006 + A1:2009 +
AC:2010 (in extracts)
Safety of machinery - Electrical equipment of machines
Part 1: General requirements
EN 61800-3:2004 + A1:2012 Adjustable speed electrical power drive systems.
Part 3: EMC requirements and specific test methods
To Next Page
Loading...