Baumuller BM5-O-SAF-000 - 1 Document History

7
of 114
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Document no.: 5.09013.07
1DOCUMENT HISTORY
Revision
level
State Modifications
01 16.11.2010 Initial document
02 17.05.2011 SAF-000 Default- and Parameter module added
03 07.08.2012 Push button combination for push button S1 added;
Chap. 8.12 times added
Mode of operation SAF-000 and SAF-001 changed
Type code SAF-000 and SAF-001 changed
Chap. 8.11.1 LED display corrected
Chap. 9 SAF-100 Reset module added
Chap. 10 Resetting by the controller added
Chap. 13.3 Exchanging the module changed
04 27.05.2014 SAF-001-000-002 (automatic restart) added
Chap. 8.3 Compatibility list SAF-001-000-002 new
Chap. 8.9 Pin assignment SAF-001-000-002 new
Chap. 8.15 Automatic restart SAF-001-000-002 new
Chap. 8.16 Type code SAF-001-000-002 added
Chap.8: SAF-001-000-001 removed
05 08.11.2016 New declaration of conformity
06 20.09.2017 Safety Module SAF-001-001-xxx added
Chap. 8.3 Compatibility list SAF-001-001-xxx new
Chap. 8.6.2 Working principle SAF-001-001-xxx new
Chap. 8.7.2 Input circuitry SAF-001-001-xxx new
Chap. 8.8.2 Structure Safety Module (SAF-001-001-xxx) added
Chap. 8.9.2 Pin assignment of connector X1 (
SAF-001-001-xxx) added
Chap. 8.10 Switching thresholds SAF-001-001-xxx added
Chap. 8.16 Type code SAF-001-001-xxx added
Declaration of conformity SAF-001
-001-xxx added
07 19.11.2018 Safety Module SAF-001-001-001 (Safe Stop 1) added
Chap. 8.1.2 SAF-001-001-001 added
Chap. 8.2.2 Compatibility list SAF-001-001-001 added
Chap. 8.4.2 Working principle SAF-001-001-001 added
Chap. 8.14 Type code SAF-001-001-001 added