- 44 -
support current multimedia contents. The MT1389S provides the interface for the 3-in-1 card reader, which
supports Memory-Stick, Secure Digital Memory Card, and Multimedia Card, to connect with the mainstream
digital camera FLASH cards. For the USB application, we adopt USB2.0 High speed specification to reach
rich-contents transferring. USB 1.0/1.1 support data transfer at up to 1.5 Mbps for low-speed devices and up
to 12 Mbps for full-speed devices. USB 2.0 will support up to 480 Mbps for high-speed devices. USB 2.0 is
suitable for high-performance devices such as high-density storage devices. In addition, USB 2.0 supports old
USB 1.0/1.1 software and peripherals, offering impressive and even better compatibility to customers.
2. General Feature lists
(1) Super Integration DVD player Single Chip
High performance analog RF amplifier
Servo controller and data channel processing
MPEG-1/MPEG-2/JPEG video
MPEG-4 ASP video
WMV9 VC-1 video
ATRAC with OpenMG audio file
Dolby AC-3/DTS
Unified memory architecture
USB 2.0 High Speed (Host/Device)
MS/SD/MMC interface
Versatile video scaling & quality enhancement
OSD & sub-picture
2-D graphic engine
Support DVD –Audio
SACD multi-channel audio
Audio effect post-processor
Audio input port
Built-in clock generator
Built-in high quality TV encoder
Built-in progressive video processor
Built-in 8ch audio DACs
Built-in HDMI1.2 output support
Built-in DVB-T decoder
(2) High Performance Analog RF Amplifier
Programmable fc
Dual automatic laser power control
Defect and blank detection
RF level signal generator
To Next Page
Loading...
