Commissioning
C6030 21Version: 2.7
4.2.2 Dimensions
The dimensions of the Industrial PC and the mounting plates are used to prepare the control cabinet and to
mount the device correctly in the control cabinet.
All dimensions are in mm.
Fig. 11 gives an example of the dimensions using the mounting option via the rear of the device with
mounting plate 1.
78,6
150
133
137
7
78,6
129
145
39,1
Fig.11: C6030 _mounting plate rear panel
Fig. 12 shows the dimensions using the mounting option with the connections pointing to the right with
mounting plate 2 as an example.
142
157
133
7
80,6
129
102
70
7,5
14,5
Fig.12: C6030 _Mounting plate side panel
To Next Page
Loading...
Need help?
General
