Beckhoff EL6910 - Creating a Safety Project in TwinCAT 3

Operation
EL6910 29Version: 1.4.1
4.4.6 Creating a safety project in TwinCAT3
Note
Further documentation
Information on TwinSAFE function blocks, groups and connections can be found in the
TwinSAFE Logic FB documentation on the Beckhoff website under
http://www.beckhoff.com/english/download/twinsafe.htm.
4.4.6.1 Add new item
In TwinCAT 3 a new project can be created via AddNewItem… in the context menu of the Safety node.
Fig.14: Creating a safety project - Add New Item
The project name and the directory can be freely selected.
Fig.15: Creating a safety project - project name and directory
4.4.6.2 TwinCAT Safety Project Wizard
In the TwinCATSafetyProject wizard you can then select the target system, the programming language, the
author and the internal project name. Select the setting HardwareSafetyPLC as the target system and the
graphical editor as the programming language. The author and the internal project name can be freely
selected by the user.