Beckhoff EL6910 - Info Data for the Twinsafe Group

Operation
EL691066 Version: 1.4.1
Fig.78: Info data for the function block in the I/O tree structure
4.5.3 Info data for the TwinSAFE group
For TwinSAFE groups, info data can be enabled via the properties of the TwinSAFE group.
Fig.79: Enabling the info data in the properties of the TwinSAFE group
The info data are shown in the I/O tree structure below the I/O device in the process image. From here,
these signals can be linked with PLC variables. Further information on the included data can be found in the
documentation for TwinCAT function blocks for TwinSAFE logic terminals.