Operation
EL6910 71Version: 1.4.1
Fig.88: User Administration - New User added
Use the Finish button to exit the dialog.
Access Rights Description
Change Password Users can change their password.
Download Safe Logic Data The user can load the safety program onto the EL6910, EJ6910 or
EK1960.
Download Mapping Data The user can load the mapping data for inputs, outputs, FBs etc. onto the
EL6910, EJ6910 or EK1960.
Download Safe User Data/
Replacement Values
The user can change safe user parameters on the EL6910, EJ6910 or
EK1960change and also change and load safe substitute values
Download Info Data The user can activate and load the info data for connections and FBs on
the EL6910, EJ6910 or EK1960.
Activate / Deactivate Groups The user can execute Customizing (enable and disable of TwinSAFE
groups) on the EL6910, EJ6910 or EK1960.
4.8 Backup/Restore
After a EL6910, EJ6910 or EK1960 replacement, the Backup/Restore mechanism can be used to load the
previous project onto the new device.
In order to be able to use this functionality, the Backup/Restore mechanism must be enabled in the safety
project, and the terminals must be selected, on which the current CRC of the safety project is to be stored.
For a restore operation the user can specify the minimum number of selected terminals on which the correct
CRC must be stored.
The Restore User Administration checkbox can be used to specify whether the user administration is to be
included in the restore operation on the new device.
To Next Page
Loading...
Need help?
General
