Page 22
4.2 MUTE GROUPS
Mute groups provide a very easy way to mute multiple channels with the press of a single button –
we have set up four custom mute groups for the sound board as follows:
1 - Mute Band
2 - Mute Service
3 - Mute Stage Monitors
5 - Mute ALL
The mute groups have been labelled, and are available in the MUTE GROUPS section of the board
just to the right of the main fader that controls the Front of House volume (right side of the board).
Figure 28 - Mute Group Buttons
Note that when you first load a default scene into the board, the Band, Service and Stage Monitors
are all muted by default.
This provides a quick way during the service to mute things or if everything goes crazy to mute
EVERYTHING using the Mute ALL button.
If you are not getting any sound, check the MUTE GROUPS.
To Next Page
Loading...
