GN-9371_2_3 User Manual
Page 67 of (110)
G-series GN-9371_2_3 PIO Rev. 1.02.docx
10 Event Log
User can view the PLC log in this tab of the generic device editor. It lists the events that were recorded on the
target system. This concerns:
- Events during the startup and shutdown of the system (components loaded, with version)
- Application download and loading of the boot application
- Custom entries
- Log entries from I/O drivers
- Log entries from data sources
(1) Route: Device’ -> Log
To Next Page
Loading...