GN-9371_2_3 User Manual
Page 35 of (110)
G-series GN-9371_2_3 PIO Rev. 1.02.docx
6.7 Memory Reset
Data field 0x55AA makes the remote device to restart with factory default setup of EEPROM.
*All expansion slot configuration parameters are cleared.
(1) Run ‘[Crevis] -> [IOGuidePro] -> [Protocol Messenger] -> [Modbus]’
(2) Write the value of each.
*Protocol : Modbus RTU
*ComPort : User Port / Baudrate : 115200(default)
*Address(Hex) : 0001 (Factory default setup)
*Function(Dec) : When the value is write – 08, Diagnostics
(3) Write the register value and click the ‘Send’ button.
*Value : 0x55AA
To Next Page
Loading...