BEKA FKGGM-EP - Pu Mp Element with Solenoid Valve at Cen Tral Lubrication Pumps for Single Line Systems

Subject to alterations!
...a product from
BAL2076_central lubrication pump_0119EN
© BEKA 2019 All rights reserved
3.3.3 Pu tral lubrication pumps for single line systemsmp element with solenoid valve at cen
The solenoid valve which is installed at the central lubrication pump is a 2/2-way valve, consisting of valve part,
connection block and pump element (fig. 12).
As soon as the switching pressure, as adjusted, is reached, the central lubrication pump is switched off and the
solenoid valve releases the way to the reservoir return. The main line is relieved and lubricant is supplied to the
lube points by the distributor.
Fig. 12 :
Technical data:
Way seat valve: VP1-S-A24
Type of actuation: 24V DC electric
Switch symbol: S
Connection: 1/4"
Volume flow: Q 15 l / min
max.
Operating pressure: p 400 bar
max.
Central plug
Nominal power: 20 P (W)
N
Current: 0,83 l (A)
N
Manual emergency button
Press the button
max. actuation pressure 80 N
1)
this dimensions depends on the
manufacturing process and can have
up to 40 mm acc. to EN 175 301-803
A
2)
adapter can be installed offset 22,5°
or 180°,
at adjacent order not all angle
positions are possible
switch symbol
Adapter )
2
Cable fitting
Solenoid valve
Pump element
Connection block
19