BHT-430-MM-2
5-00-00
Page 76 Rev. 15 26 JAN 2007
Chapter 25 and
Chapter 52
5. Remove the interior trim around the emergency exit
windows in the passenger doors. Examine the emergency exit
windows as follows: (F3/F4)
Chapter 52 a. Examine the bond between the window retainer and the
door frame. Replace the retainer if it is not correctly bonded to
the frame at all points except at the two lower corners.
b. Examine the inboard and outboard side of all of the
rubber retainers. Replace the retainers if you find any nicks or
cracks.
c. Make sure the filler strips are firmly seated in the
retainer grooves.
Chapter 25 d. Install the interior trim.
Chapter 25 6. Examine the seat cushions and seat backs for tears and
deterioration. Make sure they are correctly attached. (F1/F2/F3/
F4)
Chapter 25 7. Examine the seat assemblies to make sure they are
correctly attached to airframe structure. (F1/F2/F3/F4)
Chapter 25 8. Examine the crew seat attenuation indicators. (F1/F2)
Chapter 25 9. Examine the safety belts and shoulder harnesses for
deterioration. Make sure they are correctly attached to the
airframe structure. (F1/F2/F3/F4)
Chapter 26 10. Examine the cabin fire extinguisher for damage or
corrosion. Examine the operation of the quick opening clamp.
Make sure the fire extinguisher is fully charged. (F1/F2)
Chapter 11 and
BHT-430-FM-1
11. Examine the placards and instrument panel decals. Make
sure they are clear and legible. (F1/F2)
12. Examine the contents of the first aid kit. Replace any
damaged or time expired items. Replace any items with
deteriorated packaging. (F2)
SCHEDULED INSPECTIONS
5-27. PROGRESSIVE INSPECTION — EVENT 12 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
