BELL HELICOPTER 430 - 5-49. ONE ENGINE INOPERATIVE (OEI); NOTE; 1. When an OEI event has been recorded, perform the following:

BHT-430-MM-2
5-00-00
26 JAN 2007 Rev. 15 Page 139
CONDITIONAL INSPECTIONS
5-49. ONE ENGINE INOPERATIVE (OEI)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. ____________________
_
FACILITY: _________________________________________
_
HELICOPTER S/N: __________________________________
_
REGISTRY NO.: ____________________________________
_
TOTAL TIME:______________________________________
_
SIGNATURE:_______________________________________
_
NOTE
The Integrated Display System (IIDS) records any
OEI events (2 minutes, 30 seconds) and OEI MGT/
TORQUE peaks, total duration, and date of
occurrence for each engine.
1. When an OEI event has been recorded, perform the
following:
Chapter 95 a. Verify the maintenance pages of both IIDS screens for
any exceedances. Review ECU engine faults, engine
exceedances and engine history data pages.
NOTE
Full Authority Digital Engine Control (FADEC) system
must be self-tested to confirm proper functioning.
Self-test is performed every time power is applied to
the helicopter.
b. Download and review engine history data including
FADEC faults from the ECU using the MT35 program.