BHT-430-MM-2
5-00-00
Page 90 Rev. 15 26 JAN 2007
NOTE
The presence of cracks in the pins and/or the
bushings will require the removal of the collective
lever from the swashplate assembly for overhaul, at
which time both the bushings and pins will be
removed and scrapped.
Chapter 62 e. If the pins and bushings are suitable for return to
service, reinstall the left and right cyclic lever assemblies P/N
430-010-406 on the swashplate assembly.
SCHEDULED INSPECTIONS
5-33. EVERY 1200 HOURS OF COMPONENT OPERATION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
