BHT-430-MM-2
5-00-00
ECCN EAR99
Chapter 63 16. Examine the left oil cooler blower driveshaft and couplings
for damage. Make sure they are correctly attached. Examine
the discs for cracks that radiate from the bolt holes, corrosion,
wrinkles or other signs of overstress. (E1)
Chapter 79 and
BHT-430-CR&O-V.2
17. Examine the left oil cooler blower for blockage, cleanliness
and damage. Make sure it is correctly attached. (E1)
Chapter 71 18. Examine the right power plant area for fuel or oil leaks.
Examine the flexible and rigid fuel and oil lines for wear, chafing
and damage. Make sure they are correctly attached. (E2)
Chapter 71 19. Examine the right engine mounts and accessories for
damage. Make sure they are correctly attached. (E2)
Chapter 76 20. Examine the right engine power lever, fuel control box
assembly and control cable for looseness and correct range of
motion. Make sure they are correctly attached. (E2)
Chapter 63 21. Examine the right oil-cooler blower driveshaft and
couplings for damage. Make sure they are correctly attached.
Examine the discs for cracks that radiate from the bolt holes,
corrosion, wrinkles or other signs of overstress. (E2)
Chapter 79 and
BHT-430-CR&O-V.2
22. Examine the right oil cooler blower for blockage,
cleanliness and damage. Make sure it is correctly attached. (E2)
Rolls-Royce
250-C40B Operation
and Maintenance
Manual, Publication
CSP 21000
23. Start the helicopter (BHT-430-FM-1) and do a FADEC
manual mode check.
SCHEDULED INSPECTIONS
5-18. PROGRESSIVE INSPECTION — EVENT 3 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
1 SEP 2009 Rev. 17 Page 37/38
To Next Page
Loading...
