BHT-430-MM-2
5-00-00
Page 48 Rev. 15 26 JAN 2007
NOTE
Examine inspection window(s) and sight glass(es)
for cracking and discoloration. If either of these
conditions are present the part must be removed and
replaced prior to returning helicopter for service.
Chapter 29 19. Examine the hydraulic lines for leaks. Examine the color
and level of the fluid in the PC-1 system and PC-2 system
reservoirs. Examine the module pressure and return filters for
impending bypass indication. Make sure that the flexible hoses
are in good condition and do not show signs of chafing. (F5/F6)
SCHEDULED INSPECTIONS
5-20. PROGRESSIVE INSPECTION — EVENT 5 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
