Operation and setting
38
IRDH275BM-7_D00123_06_M_XXEN/07.2018
5.4 Menu ISO SETUP: Setting of the basic ISOMETER®
functions
All alarm functions such as Alarm 1 and Alarm 2 (prewarning and main alarm),
the operating principle of the alarm relays K1 and K2 (N.O = N/O operation,
N.C = N/C operation), the fault storage behaviour and a selection of two cur-
rent output ranges are set in this menu.
5.4.1 Response values Alarm 1 and Alarm 2
The response values Alarm 1 and Alarm 2 are selected with the UP/DOWN
keys and stored with the ENTER key.
To Next Page
Loading...
