Bender AGH675S-7 - Data in Tabular AGH675 S-7 MV15

Technical data IRDH275BM-7 with AGH675S-7…
63
IRDH275BM-7_D00123_06_M_XXEN/07.2018
7.4 Data in tabular AGH675S-7MV15
Insulation coordination in consideration of IEC 61800-5-1:2003
Rated voltage....................................................................................................................................................AC 15.5 V
Voltage test in consideration of IEC 61800-5-1:2003
Type test:
Rated impulse voltage (basic insulation)............................................................................................................. 111 kV
AC voltage test (basic insulation)........................................................................................................................... 70 kV
Partial discharge test ..............................................................................................................................................29 kV
Routine test:
AC voltage test ........................................................................................................................................................40 kV
Voltage ranges
Nominal voltage range U
n
.............................................................................................. AC, 3(N)AC, DC 0…15.5 kV
Nominal frequency f
n
.................................................................................................................................... 0…460 Hz
Environment/EMC
Operating temperature (normal operation)............................................................................................-10…+60 ºC
Operating temperature (continuous operation with asymetrical earth fault)........................................-10…+55 ºC
Classification of climatic conditions acc. to IEC 60721:
Stationary use (IEC 60721-3-3) ............................................................... 3K5 (no condensation, no formation of ice)
Transport (IEC 60721-3-2)........................................................................................................................................ 2K3
Long-term storage (IEC 60721-3-1)......................................................................................................................... 1K4
Classification of mechanical conditions acc. to IEC 60721:
Stationary use (IEC 60721-3-3) ........................................................................................................3M4 (3M7 Y shaft)
Transport (IEC 60721-3-2)....................................................................................................................................... 2M2
Long-term storage (IEC 60721-3-1)........................................................................................................................ 1M3
Connection
Connection terminal 2 (medium voltage)............................... high-voltage cable (encapsulated on the device side)
Connection, flexible with ring terminal ............................................................................................................. M4
Connection terminal 3, 4, 5.......................................................................................................... screw-type terminals
Connection, rigid, flexible.............................................................................................. 0.2…4 mm
2
/0.2…2.5 mm
2
Connection, flexible with connector sleeve .......................................................................................... 0.25...2.5 mm
2