Bender AGH675S-7 - Standards and Approvals

Technical data IRDH275BM-7 with AGH675S-7…
60
IRDH275BM-7_D00123_06_M_XXEN/07.2018
7.2 Standards and approvals
Standards
The ISOMETER® was designed under consideration of the following standard:
- IEC 61557-8: 2007 + Corrigendum 2007-05
- IEC 61326: 2002-02
- DIN EN 61557-8: 2007-12
- EN 61557-8: 2007
- EN 61326-2-4: 2006-06 Ed. 1.0
- DIN EN 60664-1: 2008-01
- DIN EN 60664-3: 2003-09
- ASTM F1669M-96: 2007
- ASTM F1207M-96: 2007
Subject to change! The specified standards take into account the edition valid
until 07.2018 unless otherwise indicated.
Approvals
IRDH275BM-7 and AGH675S-7: