Table of Contents
4
IRDH275BM-7_D00123_06_M_XXEN/07.2018
5. Operation and setting .................................................................................. 30
5.1 Operating features and displays IRDH275BM-7 ................................. 30
5.1.1 Display in the standard mode ................................................................... 31
5.1.2 Display in the menu mode ......................................................................... 31
5.1.3 Function keys .................................................................................................. 32
5.2 Menu structure and menu mode ............................................................ 34
5.2.1 Diagram menu structure ............................................................................ 35
5.3 Menu HISTORY INFO .................................................................................... 36
5.3.1 Diagram HISTORY INFO ............................................................................... 37
5.4 Menu ISO SETUP: Setting of the basic ISOMETER® functions ........ 38
5.4.1 Response values Alarm 1 and Alarm 2 ................................................... 38
5.4.2 Operating principle of the alarm relays ................................................ 39
5.4.3 Memory setting (on/off) .............................................................................. 41
5.4.4 Current output for external measuring instruments ........................ 41
5.5 Menu ISO ADVANCED: Setting of the extended functions ........... 42
5.5.1 Coupling devices AGH: 675S-7… ............................................................ 42
5.5.2 Adaptation to the system leakage capacitance Cemax .................. 42
5.5.3 Measuring principle (Measure: AMP) ..................................................... 42
5.5.4 Setting the repetition time for automatic self tests
(Autotest: 24h) ................................................................................................ 42
5.5.5 Setting the real-time clock (Clock) .......................................................... 42
5.5.6 Setting the date (Date) ................................................................................ 43
5.5.7 Specifying the starting time of the automatic self test (Test)
(IRDH275B) ....................................................................................................... 43
5.5.8 Diagram ISO ADVANCED ............................................................................ 44
5.6 Menu COM SETUP: Setting the BMS interface .................................... 45
5.6.1 Bus address „Addr:“ ...................................................................................... 45
5.6.2 Diagram COM SETUP ................................................................................... 46
5.7 Menu PASSWORD ......................................................................................... 47
5.7.1 Activating and setting the password ..................................................... 47
5.7.2 Diagram PASSWORD .................................................................................... 48
5.8 Menu LANGUAGE .......................................................................................... 49
To Next Page
Loading...
