13
COM465IP-COM465DP_D00216_02_M_XXEN/03.2017
3. Product description
3.1 Scope of delivery
You will receive:
the gateway COM465…
A printed quick reference guide
the manual "COMTRAXX® COM465IP/COM465DP", "COMTRAXX" and "BCOM" as pdf files. You
can obtain the manuals at:
http://www.bender.de > Service & support > Download > Operating
manuals
The configuration file for PROFIBUS DP: "BEND0F27.gsd" (COM465DP only)
You can obtain the latest version of the file at:
http://www.bender.de > Service & support > Download > Software
Only registered users can download software. Please register with your e-mail address.
3.2 Device features
Condition Monitor for Bender systems:
An integrated modular gateway between the Bender system and TCP/IP allows remote access
via LAN, WAN or Internet.
Features adaptable by means of the function modules.
Ethernet (10/100 MBit/s) for remote access via LAN, WAN or Internet.
Support for devices that are connected to the internal BMS bus via BCOM, Modbus RTU or Mod-
bus TCP.
Additional to COM465DP only: An integrated gateway between the Bender system and PROFI-
BUS DP.
3.2.1 Functional scope of COM465IP and COM465DP
basic device (without function modules)
Condition Monitor with a web interface for use with Bender BMS and BCOM devices and univer-
sal measuring instruments.
Support for devices that are connected to
– to the internal (max. 139 devices) or external* BMS bus (max. 98 * 139 devices)
– via the BCOM interface (see the BCOM operating manual)
– via Modbus RTU or via Modbus TCP (max. 247 devices).
Remote display of the latest measured values, status and alarms messages, and parameters*.
COM465DP only: Coupling gateway for PROFIBUS DP devices.
Gateway to Modbus TCP: Reading the latest subsystem measured values, status and alarm mes-
sages from addresses 1 ... 10 via Modbus TCP.
Ethernet interface with 10/100 MBit/s for remote access via LAN, WAN or Internet.
To Next Page
Loading...