Important information
8
COM465IP-COM465DP_D00216_02_M_XXEN/03.2017
To make it easier for you to understand and revisit certain sections in this manual, we have used sym-
bols to identify important instructions and information. The meaning of these symbols is explained
below:
Although great care has been taken in drafting this manual, it may nevertheless contain errors and
mistakes. Bender cannot accept any liability for injury to persons or damage to property resulting
from errors or mistakes in this manual.
1.2 Technical support: service and support
For commissioning and troubleshooting Bender offers you:
1.2.1 First level support
Technical support by phone or e-mail for all
Bender products
Questions concerning specific customer applications
Commissioning
Troubleshooting
Telephone: +49 6401 807-760*
Fax: +49 6401 807-259
In Germany only: 0700BenderHelp (Tel. and Fax)
E-mail: support@bender-service.de
1.2.2 Repair service
Repair, calibration, update and replacement service for Bender products
Repairing, calibrating, testing and analysing Bender products
Hardware and software update for Bender devices
This signal word refers to a hazard with a high level of risk that, if it is not avoid-
ed, will result in death or serious injury.
This signal word refers to a hazard with a medium level of risk that, if it is not
avoided, may result in death or serious injury.
This signal word refers to a hazard with a low level of risk that, if it is not avoided,
may result in minor injury or damage.
This symbol refers to information that is designed to help you make the best use
of the product.
To Next Page
Loading...