Bender COMTRAXX COM465IP - Function Module C; Function Module D; Function Module E; Function Module F

Product description
15
COM465IP-COM465DP_D00216_02_M_XXEN/03.2017
3.2.4 Function module C
 Quick and easy parameterisation of all assigned gateway devices* by means of a web browser
 A backup file containing the settings of all devices in the system can be generated and
imported.
*) The parameterisation of BMS bus devices is only possible if the gateway is connected to the internal
BMS bus.
3.2.5 Function module D*
 Fast, simple visualisation without programming. Device statuses, alarms or readings can be
arranged and displayed (e.g. a spatial plan) in front of a background image.
– Display of an overview covering several pages. Jump to another view page and back to the
overview page.
– Graphical display of the data logger with scaling of the time axis.
– System data display: Several Gateways (COM460IP, COM465IP, COM465DP, CP700) are dis-
played on a web page. Display of collective gateway alarms. By clicking on the depicted
Gateway opens its web user interface.
*) Currently the Silverlight web interface is still required.
3.2.6 Function module E
 100 virtual devices with 16 channels each can be created.
3.2.7 Function module F
 1600 data points from third-party devices (via Modbus RTU or Modbus TCP) can be integrated
into the system.
Example:
 To write parameters via Modbus, function modules B and C are required.
 To read parameters via Modbus, function module B is required.
 Parameterisation via PROFIBUS is only possible with COM465DP and function module C.
3.3 Applications
 Optimum display and visualisation of device and plant statuses in the web browser
 Observing and analysing compatible BENDER products (ISOMETER®, ATICS®, RCMS, EDS, Line-
traxx® and MEDICS systems, universal measuring devices and energy meters)
 Specific system overview according to individual installation description
 Notifying different users in the event of alarms
 Using professional visualisation programs, which are implemented on the Modbus TCP or
PROFIBUS DP protocol
 Clear setting of parameters for devices, saving, documenting and restoring parameters
 Commissioning and diagnosis of Bender systems
 Remote diagnosis, remote maintenance