Modbus TCP server
55
COM465IP-COM465DP_D00216_02_M_XXEN/03.2017
To convert the data of parameters, you will need data type descriptions.
Text representation is not necessary in this case.
203 (0xCB) Switch. el. 1 on
204 (0xCC) Switch. el. 2 on
205 (0xCD)
206 (0xCE) Auto mode
207 (0xCF) Manual mode
208 (0xD0)
209 (0xD1)
210 (0xD2) Line AV on
211 (0xD3) Line SV on
212 (0xD4) Line UPS on
213 (0xD5) Channel disabled
214 (0xD6) SwitchBackLock Back-interlocking function enabled
215 (0xD7) Phase sequ. right
216 (0xD8) Switch. el. pos.0
217 (0xD9) Line BSV on
218 (0xDA) On SMO48x: Alarm, relay
Value Description of parameters:
1023 (0x3FF)
Parameter/measured value invalid.
The menu item for this parameter is not displayed
1022 (0x3FE) No measured value/no message
1021 (0x3FD) Measured value/parameter inactive
1020 (0x3FC)
Measured value/parameter only temporarily inactive (e.g. during the transfer of a new
parameter) Display in the menu "…".
1019 (0x3FB) Parameter/measured value (unit not displayed)
1018 (0x3FA) Parameter (code selection menu) unit not displayed
1017 (0x3F9) String max. 18 characters (e.g. device type, - variant, …)
1016 (0x3F8)
1015 (0x3F7) Time of day
1014 (0x3F6) Date day
1013 (0x3F5) Date month
1012 (0x3F4) Date year
1011 (0x3F3) Register address (unit not displayed)
1010 (0x3F2) Time
1009 (0x3F1) Factor multiplication [*]
Value
Measured value
description alarm
message operating
message
Note
To Next Page
Loading...