TRANSMISSION OIL REPLACEMENT
NOTE:
Make sure the scooter is upright when replacing
the oil.
1. Stand the scooter on a level surface.
2. Start the engine for several minutes to
warm it up and then stop.
3. Place an oil pan under the crankcase.
4.
•
Remove:
•
Oil filler cap 2
2
Drain bolt
1
Drain the oil.
5.
•
Tighten:
1
Drain bolt
6.
•
Fill:
Crankcase
CAUTION:
Wipe any spilled oil off the tire or the wheel.
7.
•
Install:
•
Oil filler cap
1
O-ring
2
8. Start the engine for several minutes to
warm it up and check for the oil leakage.
To Next Page
