EasyManua.ls Logo

Benelli ZAFFERAN 250 - CRANKCASE FILTER CLEANING; Inspect; Clean

Benelli ZAFFERAN 250
187 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
CAUTION:
Do not twist the element when squeezing
the element.
5. Apply the recommended oil to the entire
surface of the filter and squeeze out the ex-
cess oil. The element should be wet but not
dripping.
Recommended oil:
Foam Air Filter Oil
Never use low flash point solvents such as
gasoline to clean the air filter element. Such
solvents may cause a fire or an explosion.
6.
Install:
Air filter element
Air filter case cover
Side panels
CRANKCASE FILTER CLEANING
1.
R
emove:
Crankcase filter cover
1
Crankcase filter cover seal
Crankcase filter element
2
NOTE:
When installing the element in its case, be
sure its sealing surface matches the sealing
surface of the case so there are no air leaks.
2.
Inspect:
Crankcase filter element
Damaged Replace.
CAUTION:
This element is a dry type.
Be careful not to stain with grease or water.
3.
Clean:
Crankcase filter element
1
Blow out the dust in the element from the
outer surface using compressed air.

Table of Contents

Related product manuals