NOTE:
When bleeding the brake system, make sure
that there is always enough brake fluid in the
brake fluid reservoir before applying the brake
lever. Ignoring this precaution could allow air to
enter the brake system, considerably lengthen-
ing the bleeding procedure.
j.
•
Tighten the bleed screw.
Bleed screw
NOTE:
If bleeding is difficult, it may be necessary to let
the brake fluid settle for a few hours. Repeat the
bleeding procedure when the tiny bubbles in the
brake system have disappeared.
k. Fill the brake fluid reservoir to the proper
level.
Check brake operation after bleeding the brake
system.
To Next Page
Loading...
