FRONT FORK INSPECTION
Securely support the scooter so that there is no
danger of it falling over.
1. Stand the scooter on a level surface.
2.
•
Check:
Inner tube
•
Scratches / damage → Replace.
Oil seal
Excessive oil leakage → Replace.
Hold the scooter upright and apply the
front brake.
3.
•
Check:
Operation
Push down hard on the handlebars sev-
eral times.
Unsmooth operation → Repair.
REAR SHOCK ABSORBER INSPECTION
1.
•
Remove:
•
Side panel
Box
•
Check:
Rear shock absorber mount
Looseness → Tighten.
Bolt (upper)
1
Bolt (lower)
2
REAR SHOCK ABSORBER ADJUSTMENT
Always adjust each rear shock absorber
preload to the same setting. Uneven ad-
justment can cause poor handling and
•
loss of stability.
Securely support the scooter so there is
no danger of it falling over.
To Next Page
Loading...
