Check the fan switch.
Replace it when the switch doesn’t work
normally.
①：cooling fan ②：fan switch
①
②
Pressure test the radiator.
Remove the radiator cover after the coolant has
fully cooled. Apply the required pressure to the
cooling system with the radiator pressure tester
(lower than pressure for opening the valve of the
cap) and ensure that it can keep for at least 6s
under the required pressure; In the case of
pressure leakage, check the hoses, all
connections, pump position and inspection hole.
7.6.3 Installation
Install it in reverse order.
①：radiator pressure tester
To Next Page
Loading...
