Benning Tebevert III - Page 28

TEBEVERT III INVERTER SYSTEM (120 VDC)
07.11.2011 20 028-0009-006
LED Color Meaning when LED lights up
green
The output voltage of the inverter is normal. (V
N
=
120 or 120/240V) See note Important Note below.
"OUTPUT VOLTAGE PRESENT"
green
The output voltage of the inverter is in phase and
frequency with the mains-supply voltage
"MAINS-SUPPLY SYNCHRONIZED"
red
The output current of the inverter is greater than
110% of the rated output current
"OVERLOAD"
green
The inverter is in parallel operation with other
inverters. When this LED flashes, the inverter is
operating as the MASTER.
"PARALLEL OPERATION".
red
The output voltage of the inverter is outside the
tolerance range
"FAULT".
Important Note!
The Benning Inverter Modules are 120VAC. Optional
transformer converts the output of the inverter to
120/240VAC.