4. Connect the antenna cable
Connect the TV antenna cable from your TV antenna system
or
Cable TV (CATV) to the
TV IN on the back of your TV. Check and make sure that the cable connections are
firmly in place.
Poor signal reception by the antenna will result in poor picture and/or sound quality on your •
TV. To get the best quality picture and sound, an outdoor TV antenna system that is properly
aligned will be required. Please consult with an antenna specialist for the requirement.
This TV has a built-in analog TV tuner, which allows the connection from a traditional •
analog TV antenna system. To receive digital TV programs, you will need to connect your
TV to an external digital TV tuner (decoder),
or
a digital set top box (STB).
5. Connect the power cable
1. Take out the power cable from the packaging, plug one end of the cable into the AC
POWER IN on the back of the TV (as shown below).
2. Connect the other end into an appropriate wall power outlet, and switch on the outlet (if
required). This will put the TV into off mod
e with the power indicator at button right of
the screen lights in orange.
The power cable and the outlet shown above may appear different to yours depending on •
your region.
Only use a power cable designed for your region. Never use a power cable damaged•
or
frayed. Never change the plug head of your power cable. Be aware of overload when
using extension cords
or
multiple outlet power boards.
There are no user serviceable parts in this TV. Never unscrew•
or
remove any covers from
it.
The supplied power cord is suitable for use with 100-250V AC power only.•
The type of power cord plug and jack illustrated may differ from the type used in your •
region.
Only use an appropriate power cord for your region. Never use a power cord which •
appears damaged
or
frayed,
or
change the plug type on the power cord.
Be aware of the total loading when using extension cords•
or
multiple outlet power boards.
This TV has no power switch. When installing the TV, incorporate a readily accessible •
disconnect device in the fixed wiring,
or
connect the power cord to socket-outlet which
must be provided near the TV and easily accessible. If a fault should occur during
operation of the unit, operate the disconnect device to switch the power supply off,
or
disconnect the power cord.
Warning: This TV has been engineered and manufactured with the highest priority on safety, •
however, improper handling
or
use can result in potential electrical shock
or
fi re hazard.
This TV has been engineered and manufactured with the highest priority on safety, however, •
IMPROPER HANDLING
OR
USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK
OR
FIRE HAZARD. Please handle this TV with care. If damaged, turn off the power and unplug
the power cord from the TV. Transport the TV to your nearest BenQ authorized service
centre for repair.
There are no user serviceable parts in this TV. Never unscrew•
or
remove any covers. There
are dangerous voltages inside. Turn off the power and unplug the power cord before moving
the TV.
The apparatus with Class I construction shall be connected to a mains socket outlet with a •
protective earthing connection.
The batteries shall not be exposed to excessive heat such as sunshine, fire•
or
the like.
To Next Page
Loading...
