Sewing preparation
21
2020-09 EN 5220105.00A.04
> Set the required needle position using the needle position dial.
2.7 Presser foot
Raising and lowering the presser foot
> To raise the presser foot, push the presser foot lever upwards.
> To lower the presser foot, push the presser foot lever downwards.
Changing the presser foot sole
Removing the presser foot sole
> Switch off the machine and disconnect it from the power supply.
> Raise the presser foot.
> Raise the needle.
> To remove the presser foot sole, push the lever on the rear of the presser foot holder upwards.
Fitting the presser foot sole
Prerequisite:
• The presser foot sole is removed.
To Next Page
Loading...
