Bernette B05 Crafter - Connecting Stitches - Faggot Stitch

Decorative stitches
56
2020-09 EN 5220105.00A.04
> Tie the threads in a knot on one side.
> On the other side, pull the bobbin threads and distribute the folds evenly.
> Secure the threads.
> Select the honeycomb stitch or faggot stitch.
> Set the stitch width to «6».
> Set the thread tension to «4».
> Sew decorative stitches between the gathering seams.
> Remove the tacking threads.
5.4 Connecting stitches
Joining seam with faggot stitch
The faggot stitch can be used to sew two fabric edges together at a distance. This stitch pattern is used to
decorate blouses and children's clothing. The decorative effect of this stitch pattern is more striking if thicker
thread is used.
> Fit the zigzag foot.
> Set the stitch pattern selector knob to position «G».
> Set the stitch length knob to «S1».
> Set the stitch width to «6».
> Tack the folded edges of two pieces of fabric to a piece of washable lining with a gap of 4mm.
1
2
3
1 4mm gap 3 Tacking thread
2 Washable lining