Bernette B05 Crafter - Narrow Edgestitching; Wide Edgestitching

Practical stitches
49
2020-09 EN 5220105.00A.04
> Sew the fabric with the edge of the fabric against the overlock foot guide.
4.13 Narrow edgestitching
> Fit the blind stitch foot, edge stitch foot or zigzag foot.
> Set the stitch pattern selector knob to «A».
> Set the required stitch length.
> Set the stitch width to «0».
Using the blind stitch foot or edge stitch foot:
> Place the left-hand edge of the fabric against the guide of the blind stitch foot or edge stitch foot.
> Set the left-hand needle position.
Using the zigzag foot:
> Guide the edge of the fabric along the right-hand edge of the presser foot or the markings on the stitch
plate.
> Adjust the needle position to the right.
4.14 Wide edgestitching
> Fit the blind stitch foot, edge stitch foot or zigzag foot.
> Set the stitch pattern selector knob to «A».
> Set the required stitch length.
> Set the stitch width to «0».
Using the zigzag foot:
> Guide the edge of the fabric along either the right-hand edge of the presser foot or the markings on the
stitch plate.
The markings on the stitch plate indicate the distance between the center needle position and the guideline.
1
2
1 Distance in mm 2 Distance in inches
Using the blind stitch foot or edge stitch foot:
> Place the left-hand edge of the fabric against the guide of the blind stitch foot or edge stitch foot.
> Select the left-hand needle position at the desired distance to the edge.